208 CIPR-GA70D4208ABMA-AAAABA INV STD VFD GA700 Series AC Drive YASKAWA 120 HP

Product Description

Yaskawa GA700 Series AC Inverter for 45kW (60HP) 400V 3ph motor to 91A at high overload or 55kW (75HP) to 103A when Fan/Pump rated. Operates in VxF, Sensorless Vector or Full Closed-loop Vector control (with the optional encoder feedback card) and converts fixed frequency Three Phase 400V input to variable frequency Three Phase 400V to control a standard AC induction, permanent magnet or synchronous reluctance motor.

Size 5: 255mm Wide x 280mm Deep x 450mm High. IP20.

Weight: 25kg.

Overload: 150% x 60 seconds. High Overload.
Overload: 110% x 60 seconds. Fan/Pump Rated.
Speed Control Range: 0-590Hz.
Braking: Built-in braking transistor for 100% Torque x 10 seconds every 100 seconds to 8.7 Ohm minimum external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.

Includes removable Operator Keypad, 3 Analogue Inputs, 8 Digital Inputs, 1 Pulse Input, 2 Analogue Outputs, 1 Pulse Output, 4 Relay Outputs (1 x Fault Relay), terminals for MEMOBUS/Modbus RS485 Communications, terminals for dual channel SIL3 safe torque off (STO), 24V DC input to power the control unit when the main supply is disconnected. USB mini-B port for PC connection.

Input Current: 86.5A at High Overload, 105A when Fan/Pump rated.
Input Voltage: 380-480V Three Phase -15% +10% at 50-60Hz ±5%.
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial). Disabled by default, can be enabled via screw.

Cubicle mount.
Rated 50C ambient.
Ventilation space in front: [not specified], above: 120mm, below: 120mm, at sides: 30mm.
Heat Loss at max output: 1178W at High Overload, 1117W when Fan/Pump rated.
Mounting via 4 x M6 bolts (not supplied) at rear on 170mm (top) and 165mm (bottom) x 424mm centres